incoloy800、incoloy800H(UNS N08810)、incoloy800HT (UNS N08811)
incoloy800、incoloy800H(UNS N08810)、incoloy800HT (UNS N08811),
INCOLOY 800/800h /800HT band INCOLOY 800/800h /800HT, INCOLOY 800/800h /800HT mea kūʻai, INCOLOY 800/800h / 800HT platen, INCOLOY800/800h /800HT draad, hoʻohana i ka 800/800h /800HT smeedwerk, paʻa,
Incoloy 800(UNS N08800), nickel Alloy 800, Inconel 800, W.Nr 1.4876
Incoloy 800H(UNS N08810), Nickel Alloy 800H, Inconel 800H, W.Nr 1.4958
Incoloy 800HT (UNS No8811) NickelIncoloy 800HT , W.Nr 1.4959
ʻO ka Incoloy Alloy 800 he mea hoʻohana nui ʻia no nā mea pono e loaʻa ka ikaika kiʻekiʻe a kūʻē i ka oxidation, carburizing a me nā hopena ʻino ʻē aʻe o ka ʻike wela kiʻekiʻe (no nā noi wela kiʻekiʻe e koi ana i nā mea kolo a me nā waiwai haki, hoʻohana i ka Incoloy Alloy 800H a me 800HT).
ʻO nā ʻokoʻa nui ma waena o nā alloys 800, 800H a me 800HT he mau mea mechanical.Loaʻa nā ʻokoʻa mai nā haku mele i kaupalena ʻia o 800H a me 800HT a me nā anneal wela wela i hoʻohana ʻia no kēia mau ala.Ma keʻano laulā, ʻoi aku ka kiʻekiʻe o ka alloy 800 i ka wela o ka lumi a i ka wā pōkole o ka hoʻolaha ʻana i nā mahana kiʻekiʻe, ʻoiai nā alloys 800H a me 800HT ʻoi aku ka maikaʻi o ke kolo a me ka ikaika o ka haki ʻana i ka wā lōʻihi o ka ʻike wela kiʻekiʻe.
ʻO Incoloy 800/800H/800HT Ka Hui Kimia
| Alloy | % | Ni | Cr | Fe | C | Mn | Si | Cu | S | Al | Ti | Al+Ti |
| Ihelu 800 | Min. | 30 | 19 | kaulike | - | - | - | - | - | 0.15 | 0.15 | 0.3 |
| Max. | 35 | 23 | 0.10 | 1.5 | 1 | 0.75 | 0.015 | 0.60 | 0.60 | 1.2 | ||
| Incoloy 800H | Min. | 30 | 19 | kaulike | 0.05 | - | - | - | - | 0.15 | 0.15 | 0.3 |
| Max. | 35 | 23 | 0.10 | 1.5 | 1 | 0.75 | 0.015 | 0.60 | 0.60 | 1.2 | ||
| Incoloy 800HT | Min. | 30 | 19 | kaulike | 0.06 | - | - | - | - | 0.25 | 0.25 | 0.85 |
| Max. | 35 | 23 | 0.10 | 1.5 | 1 | 0.75 | 0.015 | 0.60 | 0.60 | 1.2 |
Incoloy 800/800H/800HT Nā Pono Kino
| ʻO ka mānoanoa (g/cm3) | Lae hehee (℃ ) | Modulus elastic (GPa) | ʻO ke kau wela wela (λ/(W(m• ℃)) | Koefficient hoʻonui wela ( 24 -100°C)(m/m °C) | Hana wela (°C ) |
| 7.94 | 1357-1385 | 196 | 1.28 | 14.2 | -200 ~ +1,100 |
Incoloy 800/800H/800HT Mechanical Pono
| Alloy | Puka | Kūlana | Ka ikaika tensile hope loa ksi (MPa) | ʻO ka ikaika o ka hua ma 0.2% offset ksi (MPa) | ʻO ka lōʻihi i 2″a i ʻole 4D, pākēneka |
| 800 | Pepa, Papa | Hana ʻia | 85 (586) | 40 (276) | 43 |
| 800 | Pepa, Papa Kaha, Bar | Hana ʻia | 75 (520)* | 30 (205)* | 30* |
| 800H | Pepa, Papa | SHT | 80 (552) | 35 (241) | 47 |
| 800H | Pepa, Papa Kaha, Bar | SHT | 65 (450)* | 25 (170)* | 30* |
Incoloy 800 / 800H / 800HT Kūlana a me nā kikoʻī
| Bar/Rod | Uea | Hoʻopaʻa / ʻāwili | Pepa/Pula | Paipu/Tube | Hoʻopili |
| ASTM B 408 & SB 408 | ASTM B408, AMS 5766, ISO 9723, ISO 9724, BS 3076NA15, BS 3075NA15, EN 10095, VdTüV 412 & 434, AWS A5.11 ENiCrFe-2, AWS A5.1-34 | ASTM B 409/B 906, ASME SB 409/SB 906, ASME Code Case 1325, 2339 | ASTM B409, AMS 5877, BS 3072NA15, BS 3073NA15, VdTüV 412 & 434, DIN 17460, EN 10028-7, EN 10095 | ASTM B 163/ SB 163 | ASTM B366 |
Incoloy 800 / 800H / 800HT Loaʻa nā huahana ma Sekonic Metals
Incoloy 800/800H/800HT Bars & Rods
ʻO nā kaola pōʻai / nā pā pālahalaha / nā kī Hex, Nui Mai 8.0mm-320mm, Hoʻohana ʻia no nā bolts, fastners a me nā ʻāpana ʻokoʻa ʻē aʻe.
Uea Incoloy 800/800H/800HT
Hoʻolako ʻia ma ka uea kuʻi a me ka uea puna ma ke ʻano coil a ʻoki ʻia ka lōʻihi.
Incoloy 800/800H/800HT Flange
Hiki ke hana ʻia ka nui maʻamau a me ka nui i hana ʻia e mākou me ka hoʻomanawanui pololei
Incoloy800/800H/800HT pepa a me ka pā
ʻO ka laulā a hiki i 1500mm a me ka lōʻihi a hiki i 6000mm, Mānoanoa mai 0.1mm a 100mm.
Incoloy 800/800H/800HT paipu ʻole & paipu Welded
Hiki ke hana ʻia ka nui maʻamau a me ka nui i hoʻopili ʻia e mākou me ka hoʻomanawanui liʻiliʻi
Incoloy 800/800H/800HT strip & coil
ʻO ke kūlana palupalu a me ke kūlana paʻakikī me ka ʻili ʻālohilohi AB, ka laulā a hiki i 1000mm
Incoloy 800 / 800H / 800HT Hoʻopili
ʻO nā mea Alloy i nā ʻano Bolts, screws, flanges a me nā mea wikiwiki ʻē aʻe, e like me ka kikoʻī o nā mea kūʻai aku.
No ke aha ʻo Incoloy 800/800H/800HT?
• 'Oi loa ka corrosion kū'ē i loko o ka wai media o ka wela wela loa o 500 ℃.
• Ke koʻikoʻi maikaʻi i ka corrosion kū'ē
• Mīkini maikaʻi
• Ka ikaika kolo kiʻekiʻe
• Kū'ē maikaʻi loa i ka oxidation
• Kūleʻa maikaʻi i nā kinoea puhi
• Ke kū'ē maikaʻi loa i ka carburization
• Kūleʻa maikaʻi i ka absorption nitrogen
• Paʻa paʻa maikaʻi i nā wela kiʻekiʻe
• maikaʻi weldability
Incoloy 800/800H/800HT kahua noi:
• ʻO ka umu hoʻoheheʻe Ethylene e kinai ana i nā paila • ʻO ka pohā o ka Hydrocarbon
• ʻO nā pahu, nā mea pono a me nā mea ʻē aʻe i ʻike ʻia i ka hoʻouka ʻana mai 1100-1800° F
• Na kapuahi hana • Mea hana wela
• Ka hana kemika a me ka petrochemical • Nā mea hoʻololi wela
• Super-heater a me re-heaters i loko o nā mea kanu mana • nā moku kaomi
INCOLOY 800/800h /800HT alle drie hebben een zeer vergelijkbare chemische samenstelling, dus ze hebben een uitstekende weerstand tegen reductie, oxidatie, corrosie door stikstofhoudende media, evenals weerstand tegen afwisselendolding metala ia in langdurige toepassingen bij hoge temperaturen.Maar door het verschil in (Al+Ti) inhoud van de drie, waardoor de omgeving waarin de drie materialen worden gebruikt verschillend is, wordt de specifieke prestatie geleverd: INCOLOY 800 komt uit bij temperaturen onder nul, bij kamertemper temperature van 600 graden celsius.INCOLOY 800H heeft een zeer goede treksterkte boven 600 graden c omdat het (Al+Ti) gehalte niet hoger is dan 0,7% en heeft nog steeds een goede taaiheid bij langdurige c omdat het. een goede vloeigrens bij een temperatuur boven 700 graden celsius.
Aia ʻo INCOLOY 800HT ma kahi ʻē aʻe i hoʻololi ʻia no ka INCOLOY 800/800h.Het is aan te raden om regelmatig milieumaterialen te gebruiken, afhankelijk van het materiaal,
